JY4010型電液比例閥控制器(雙比例)
一、概述
   JY4010型電液比例閥控制器是一種專門為注塑機設計的比例功率放大器，
可分別對力士樂、威克斯、油研、臺灣東鋒和機立等廠家的各類電液比例閥
進行壓力和流量的控制。其性能穩定、可靠性高，組成主要包括：
    穩壓器        
     斜坡發生器
     輸入值預調電位器     
     500HZ正弦振蕩器
    可控恒流發生器      
二、技術數據
電源電壓（V）：AC 24?∽36V±10%
功    耗（P）：*大80VA
控制電壓（U）：±9V
控制電壓*小負載電阻（R）：500Ω
*大輸出電流（Imax）：800mA
*大負載電阻（R）：45Ω(對應*大電源電壓)
先導電流（ID）：0∽200mA
顫振頻率（F）：500Hz
環境溫度（T）：0∽45℃
溫 度 漂 移 :1‰(OF Imax)/ ℃
外 型 尺 寸 :160×110×50(mm)
三、主要功能：
通過外部電位器遙控調節
撥碼開關數碼控制
斜坡上升、下降時間0.1∽5秒可調

JY4010 type electrohydraulic proportional valve controller (doubleratio)

A, this

JY4010 type electrohydraulic proportional valve controller is aspecial design for injection molding machine the proportion ofpower amplifier,

Respectively to rexroth, wicks, oil research, Taiwan east fengand machine etc all kinds of manufacturer electrohydraulicproportional valve

Pressure and flow control. Its stable performance, highreliability, composed mainly include:

stabilizer

Slope generator

The input value of pre-mixed potentiometer

500 HZ ac sinusoidal oscillator

Controllable constant current generator

Second, technical data

The power supply voltage (V) : AC 24? ∽ 36 V + 10%

Power consumption (P) : the biggest 80 VA

Control voltage (U) : + 9 V

Control voltage minimum load resistance (R) : 500 Ω

Maximum output current (Imax) : 800 mA

Maximum load resistance (R) : 45 Ω (corresponding maximum powersupply voltage)

Leading current (ID) : 0 ∽ 200 mA

Flutter frequency (F) : 500 Hz ac

Environmental temperature (T) : 0 ∽ 45 ℃

Temperature drift move: 1 ‰ OF the Imax) / (℃

The type of feet inch: 160 x 110 x 50 (mm)

Three, the main functions:

Through the external remote to adjust potentiometer

Dial the code switch digital control

Slope of rise and fall time 0.1 ∽ 5 seconds can be adjusted